ProjectView
FilterAll Projects
Name | Start Date | Completion Date | State | % Complete |
|---|---|---|---|---|
R10WG1 -- CEA/CEDIA-CEB17-A -- A Floor-to-Ceiling Guide for Residential Speaker Systems Planning, Selection and Installation for Optimum PerformanceThis recommended practices document is to be used as an informative reference for the installation, application and placement of loudspeakers in the residential environment. R10WG1 -- CEA/CEDIA-CEB17-A -- A Floor-to-Ceiling Guide for Residential Speaker Systems Planning, Selection and Installation for Optimum Performance | 2009-10-20 | 2011-12-30* | Published | 100% |
R10WG3 -- CEA/CEDIA-CEB23-A -- Home Theater Video DesignThis guide provides a standardized approach to theater installation and performance objectives outlines with recommendations for the design of high performance home theaters that meet or exceed the commercial experience. R10WG3 -- CEA/CEDIA-CEB23-A -- Home Theater Video Design | 2011-02-07 | 2012-03-30 | Published | 100% |
R10WG3 -- CEA/CEDIA-CEB28 -- Parameters of Verification for Installation of HDMI Distribution Networks Utilizing Existing CAT5/6 or COAX CablesTo educate the electronic systems designers and installers on how to utilize coaxial and CAT 5/6 cable and existing wiring infrastructure in a consumer’s home to distribute digital audio and video, while maintaining the integrity of the content and the functionality of content protection. R10WG3 -- CEA/CEDIA-CEB28 -- Parameters of Verification for Installation of HDMI Distribution Networks Utilizing Existing CAT5/6 or COAX Cables | 2011-04-21 | 2012-11-21* | Voting | 75% |
R10WG5 -- CEA/CEDIA-CEB24: Home Theater HVACThe scope of CEA/CEDIA-CEB 24 is to create a bulletin on the best practices in the design and installation of Heating, Ventilation and Air Conditioning in a Home Theater. The document will focus on sound abatement (ingress and egress) for air handling equipment (including allowing for maximum dynamic range within the listening space) proper air exchanges and treating equipment racks and spaces to maintain adequate operating temperatures and humidity. R10WG5 -- CEA/CEDIA-CEB24: Home Theater HVAC | 2009-09-11 | 2012-06-25 | Published | 100% |
R10WG7 -- J-STD-710 -- Residential Systems Documentation StandardTo create a set of unified blue-print icons which represent all facets of pre-wire and installation of electronic systems products and devices. This project does not cover anything outside of architectural blue-prints. R10WG7 -- J-STD-710 -- Residential Systems Documentation Standard | 2009-09-11 | 2011-09-12* | Draft in Development | 50% |
R10WG9 -- CEA/CEDIA-CEB29 -- Recommended Practice for the Installation of Smart Grid DevicesThis project addresses installation and wiring of residential Smart Grid devices. To give attention relationships of low and residential line voltage mediums, surge arresting for electrical networks and devices, proximity of transmitters of like frequency ranges, grounding and shielding practices and other elements that concern creating an acceptable installation environment for Smart Grid devices and systems. R10WG9 -- CEA/CEDIA-CEB29 -- Recommended Practice for the Installation of Smart Grid Devices | 2011-04-20 | 2012-03-30 | Published | 100% |
R3 -- ANSI/CEA-2010-A -- Standard Method of Measurement for Powered SubwoofersRevise ANSI/CEA-2010 and create ANSI/CEA-2010-A Standard Method of Measurement for Powered Subwoofers. | 2011-08-12 | 2012-06-25 | Published | 100% |
R3 -- CEA-CEB19 -- Recommended Loudspeaker Safety Practices5-Year Review for the reaffirmation of CEA-CEB19 Recommended Loudspeaker Safety Practices. R3 -- CEA-CEB19 -- Recommended Loudspeaker Safety Practices | 2012-06-20 | 2013-10-01* | Draft in Development | 10% |
R3WG1 -- CEA-2034 -- Standard Method of Measurement for In Home LoudspeakersThis standard defines test procedures for each of several common loudspeaker characteristics and requirements for reporting the results of such tests. The standard is applicable to all separate home loudspeakers, including those for home theater systems and/ or music systems, and including those intended for floor, shelf, on-wall or in-wall placement. R3WG1 -- CEA-2034 -- Standard Method of Measurement for In Home Loudspeakers | 2006-10-03 | 2013-12-01* | Draft in Development | 75% |
R4SC3WG1 -- ANSI/CEA-708.1 -- Closed Captioning for 3D VideoThis standard describes how to encode closed captioning for 3D video in CEA-708 caption services. R4SC3WG1 -- ANSI/CEA-708.1 -- Closed Captioning for 3D Video | 2011-06-14 | 2012-09-04 | Published | 100% |
R4SC3WG12 -- CEA-CEB21 -- Recommended Practice for Selection and Presentation of DTV AudioCEA-CEB21 recommends what actions a receiver with a single ATSC audio decoder should take in the presence or absence of AC-3 audio metadata. It includes recommendations and suggestions on how these receiver actions should interact with user selections via different implementation choices. It does not prohibit consumer device manufacturers from including additional features, nor does it recommend an upper limit to device performance. R4SC3WG12 -- CEA-CEB21 -- Recommended Practice for Selection and Presentation of DTV Audio | 2008-10-09 | 2011-06-30 | Published | 100% |
R4SC3WG15 Technical Report on Closed Captioning in IP-delivered Video ProgramingWG15 is to make a recommendation regarding using SMPTE Timed Text as referenced in the FCC regulations. The work is | 2012-05-25 | 2013-01-29 | Pre-Vote Comments | 100% |
R4SC3WG8 -- ANSI/CEA-2020 R-20XX, Other VBI WaveformsThis standard, CEA-2020, specifies four Vertical Blanking Interval (VBI) waveforms in commercial use. The electrical properties of the waveforms are covered, but the meaning of the payload data is not. The waveforms apply to 525-line, interlaced (i.e. 480i) analog television signals. The waveforms may be present on analog inputs and analog outputs, but no conformance requirements about the actual presence of the waveforms are defined in CEA-2020. R4SC3WG8 -- ANSI/CEA-2020 R-20XX, Other VBI Waveforms | 2013-02-13 | 2013-08-08* | Draft in Development | 0% |
R4SC8 -- CEA-761-B R-2012 -- DTV Remodulator Specification with Enhanced OSD CapabilityCEA-761-B defines minimum specifications for a one-way data path utilizing an 8 VSB trellis or a 16 VSB remodulator in compliance with ATSC Standard A/53, Annex D. It also defines on-screen display (OSD) capabilities. CEA-761-B applies to any type of device used to connect to an ATSC compliant digital television receiver (DTV) receiver. Devices meeting this standard should interoperate with any ATSC compliant receiver that also supports "monitor mode." R4SC8 -- CEA-761-B R-2012 -- DTV Remodulator Specification with Enhanced OSD Capability | 2011-08-02 | 2012-03-30 | Published | 100% |
R4SC8 -- CEA-799-A R-2012 -- On-Screen Display SpecificationCEA-799-A specifies syntax and semantics for bitmapped graphics data typically used for on-screen display (OSD). CEA-799-A is applicable whenever it is necessary to specify a standard method for delivery of bitmapped graphics data. The pixel formats include optional alpha-blend and transparency attributes to support composition of graphics over analog or digitally decoded video within the display. R4SC8 -- CEA-799-A R-2012 -- On-Screen Display Specification | 2011-08-02 | 2012-03-30 | Published | 100% |
R4SC8 -- CEA-CEB5-B R-2012 -- Recommended Practice for DTV Receiver “Monitor” Mode CapabilityCEA-CEB5-B is intended to provide recommendations to digital television (DTV) designers/manufacturers concerning a "monitor" mode capability. See EIA-762 for minimum specifications for a DTV remodulator. R4SC8 -- CEA-CEB5-B R-2012 -- Recommended Practice for DTV Receiver “Monitor” Mode Capability | 2011-08-02 | 2012-03-30 | Published | 100% |
R4SC8WG12 -- CEA-679-C R-2011 -- National Renewable Security StandardCEA-679-C describes the physical and electrical parameters of the interface for conditional access (CA) devices for consumer electronics (CE). It specifies the interface to a CA device that performs the signal access and, optionally, descrambling and key generation. This interface definition allows the entire CA system to be removable and hence replaceable. Very few constraints, if any, are placed on the CA system architecture. R4SC8WG12 -- CEA-679-C R-2011 -- National Renewable Security Standard | 2010-10-18 | 2011-10-18* | Draft in Development | 25% |
R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection SystemsThe copy protection systems outlined in CEA-796-A all support the copy protection frameworks described in CEA-679-C, Parts A and B. R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems | 2010-10-18 | 2012-11-20 | Voting | 100% |
R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems (CLONE)The copy protection systems outlined in CEA-796-A all support the copy protection frameworks described in CEA-679-C, Parts A and B. R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems (CLONE) | 2010-10-18 | 2012-11-20 | Voting | 100% |
R4SC8WG12 -- CEA-818-E -- Cable Compatibility RequirementsCEA-818-E Part 1 sets forth the requirements that a cable TV system meets at each receiver interface in order to support baseline services provided to consumer-owned cable-compatible digital TV receivers and other cable-compatible consumer devices that comply with the requirements of Part II. R4SC8WG12 -- CEA-818-E -- Cable Compatibility Requirements | 2010-10-18 | 2011-10-18* | Draft in Development | 50% |
R4SC8WG12--ANSI/CEA-775-C--DTV 1394 Interface SpecificationCEA-775-C defines mechanisms to allow a source of MPEG service, such as a cable or terrestrial set-top | 2012-11-20 | 2013-01-15* | Pre-Vote Comments | 50% |
R4SC8WG12--ANSI/CEA-775-C-R-20XX--DTV 1394 Interface SpecificationCEA-775-C defines mechanisms to allow a source of MPEG service, such as a cable or terrestrial set-top | 2012-12-20 | 2013-02-21* | Pre-Vote Comments | 75% |
R4SC8WG12--ANSI/CEA-775.2-A--Service Selection Information for Digital Storage Media InteroperabilityCEA-775-C [1] standardizes the IEEE 1394 [3][4] High Performance Serial Bus interface for the Digital | 2012-11-20 | 2013-01-15* | Pre-Vote Comments | 50% |
R4SC8WG12--ANSI/CEA-775.2-A-R-20XX -- Service Selection Information for Digital Storage Media InteroperabilityCEA-775-C [1] standardizes the IEEE 1394 [3][4] High Performance Serial Bus interface for the Digital | 2012-12-20 | 2013-02-21* | Pre-Vote Comments | 75% |
R4SC8WG12--ANSI/CEA-849-B--Application Profiles for CEA-775 Compliant DTVsThis standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C. R4SC8WG12--ANSI/CEA-849-B--Application Profiles for CEA-775 Compliant DTVs | 2012-11-20 | 2013-01-21* | Pre-Vote Comments | 50% |
R4SC8WG12--ANSI/CEA-849-B-R-20XX -- Application Profiles for CEA-775 Compliant DTVsThis standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C. R4SC8WG12--ANSI/CEA-849-B-R-20XX -- Application Profiles for CEA-775 Compliant DTVs | 2012-12-20 | 2013-02-21* | Pre-Vote Comments | 75% |
R4SC8WG5 -- ANSI/CEA-805-E -- Data Services on the Component Video InterfacesThis standard, ANSI/CEA-805-E, specifies how data services are carried on analog Component Video Interfaces (CVI), as described in CEA-770.2-C and CEA-770.3-C. CEA-805-D applies to all CE devices carrying data on the CVI vertical blanking interval (VBI). All CEA-805-E references to component video and/or component video interfaces are analog only, and no reference to digital is implied. R4SC8WG5 -- ANSI/CEA-805-E -- Data Services on the Component Video Interfaces | 2010-07-26 | 2013-05-17 | Pre-Vote Comments | 100% |
R4SC8WG5 -- CEA-770.3-E High Definition TV Analog Component Video InterfaceThis standard defines two raster-scanning systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate. The first image format specified is 1280 x 720 samples (pixels) inside a total raster of 750 lines, as given in Table 1. The second image format specified is 1920 x 1080 samples (pixels) inside a total raster of 1125 lines, as given in Table 1. Both image formats shall have an aspect ratio of 16:9. This standard specifies an analog i R4SC8WG5 -- CEA-770.3-E High Definition TV Analog Component Video Interface | 2012-09-21 | 2013-05-17 | Draft in Development | 100% |
R4SC8WG7 -- CEA-861-E Errata -- A DTV Profile for Uncompressed High Speed Digital InterfacesCEA-861-E establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs), digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related sources or sinks. R4SC8WG7 -- CEA-861-E Errata -- A DTV Profile for Uncompressed High Speed Digital Interfaces | 2011-02-25 | 2011-07-20 | Published | 100% |
R4SC8WG7 -- CEA-861-F -- A DTV Profile for Uncompressed High Speed Digital InterfacesCEA-861-E establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs), digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related sources or sinks. R4SC8WG7 -- CEA-861-F -- A DTV Profile for Uncompressed High Speed Digital Interfaces | 2011-07-11 | 2013-05-17 | Draft in Development | 100% |
R4WG13 -- ANSI/CEA-2013-A -- Digital STB Background Power Consumption WithdrawalWG13 is considering withdrawal of ANSI/CEA-2013-A, Digital STB Background Power Consumption. This standard defines maximum background (sleep) mode energy consumption for basic digital set-top boxes whose primary function is video reception and delivery. It is anticipated that ANSI/CEA-2043, Set-Top Box (STB) Power Measurement, will replace this standard once ANSI/CEA-2043 is complete. R4WG13 -- ANSI/CEA-2013-A -- Digital STB Background Power Consumption Withdrawal | 2012-09-11 | 2012-11-30* | Draft in Development | 25% |
R4WG13 -- ANSI/CEA-2022 -- Digital STB Active Power Consumption Measurement WithidrawalWG13 is considering withdrawal of ANSI/CEA-2022, Digital STB Active Power Consumption. This standard defines a method for measuring power consumption of a digital set-top box (STB) whose primary function is video reception and delivery when operating in an active (on) state.. It is anticipated that ANSI/CEA-2043, Set-Top Box (STB) Power Measurement, will replace this standard once ANSI/CEA-2043 is complete. R4WG13 -- ANSI/CEA-2022 -- Digital STB Active Power Consumption Measurement Withidrawal | 2012-09-11 | 2012-11-30* | Draft in Development | 25% |
R4WG13 -- ANSI/CEA-2037-A -- Determination of Television Average Power ConsumptionThis standard defines a method for measuring television average power consumption. R4WG13 -- ANSI/CEA-2037-A -- Determination of Television Average Power Consumption | 2011-02-28 | 2012-02-28* | Draft in Development | 50% |
R4WG13 -- ANSI/CEA-2043, Set-top Box (STB) Power MeasurementThis standard defines a method for measuring Set-top Box power consumption using the measurement parameters of the International Electrotechnical Commission standard “IEC62087: METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO AND RELATED EQUIPMENT”. This standard clarifies test procedures, definitions, terms, and provides localization for North American markets. R4WG13 -- ANSI/CEA-2043, Set-top Box (STB) Power Measurement | 2011-08-03 | 2013-05-17 | Voting | 100% |
R4WG16 -- CEA-2038, Command-Driven IR-Synchronized Active Eyewear StandardThis standard describes a standard for eyeware that is required to view 3D content from displays. This document relates to both active and passive eyeware used in 3D consumer electronic systems in the home. In the case of active glasses, it standardizes interfaces, signaling, setup, control and polarization. R4WG16 -- CEA-2038, Command-Driven IR-Synchronized Active Eyewear Standard | 2009-07-31 | 2011-11-30* | Voting | 75% |
R4WG18 -- CEA-CEB26 -- Mobile Handheld DTV Implementation GuidelineATSC-M/H device Implementation guideline is intended to be the consolidated database for providing adequate information and guidelines for all ATSC-M/H stakeholders. This document shall cover the minimum requirements for the ATSC-M/H device, references to specific documents/standards, recommendations and best practices to assure interoperability across different devices, geographies, service providers, application providers, operators, and networks, R4WG18 -- CEA-CEB26 -- Mobile Handheld DTV Implementation Guideline | 2009-10-22 | 2012-03-30 | Published | 100% |
R4WG19 -- CEA-2041 -- Standard for Round Tactile Feedback FeatureThis standard defines a round tactile feedback feature for remote controls. R4WG19 -- CEA-2041 -- Standard for Round Tactile Feedback Feature | 2010-05-26 | 2012-05-02 | Published | 100% |
R6 -- CEA-2003-C -- Digital Audiobook File Format and Player RequirementsCEA-2003-C defines requirements and provides recommendations to publishers, software developers, content providers, and hardware manufacturers for the data structure, usability requirements, playback systems and delivery systems for audiobooks in digital file format. Throughout CEA-2003-C, the term audiobook is defined as any audio file or collection of audio files of primarily spoken word content that is played in a linear order. R6 -- CEA-2003-C -- Digital Audiobook File Format and Player Requirements | 2011-05-24 | 2012-11-28 | Published | 100% |
R6 -- CEA-2017.1 R-2011 -- Serial Communication Protocol for Portable Electronic DevicesThis document describes a serial communication protocol that enables command and control communication between portable electronic devices and accessories attached to those devices. This protocol builds upon functions provided by the MOST network developed by the MOST Cooperation (www.mostcooperation.com). R6 -- CEA-2017.1 R-2011 -- Serial Communication Protocol for Portable Electronic Devices | 2011-05-24 | 2011-12-30* | Voting | 50% |
R6 -- CEA-885 R-2011 -- Remote Starter SafetyThis standard addresses the automotive accessories that allow the operator to start a vehicle while away from the vehicle, and the safety of such devices when installed. | 2011-05-24 | 2011-12-30* | Voting | 50% |
R6SC3WG1 -- CEA-2042.1 -- Wireless Power Glossary of TermsThis document specifies terms and definitions for wireless power. R6SC3WG1 -- CEA-2042.1 -- Wireless Power Glossary of Terms | 2011-02-09 | 2012-02-22 | Published | 100% |
R6SC3WG1 -- CEA-2042.1-A -- Wireless Power Glossary of TermsThis document specifies terms and definitions for wireless power. R6SC3WG1 -- CEA-2042.1-A -- Wireless Power Glossary of Terms | 2012-01-19 | 2013-06-14 | Published | 100% |
R6SC3WG2 -- TR-2 -- CEA White Paper on RF Exposure Regulations and Applicability to Inductive Wireless Power SystemsThis brochure informs and educates on the existing regulations and safeguards that protect the public while using devices and systems utilizing Radio Frequency (RF) energy such as wireless power systems. R6SC3WG2 -- TR-2 -- CEA White Paper on RF Exposure Regulations and Applicability to Inductive Wireless Power Systems | 2012-10-18 | 2013-02-08 | Published | 100% |
R6SC3WG3 -- CEA-2042.3 -- Methods of Measurement for Efficiency and Standby Power of Wireless Power SystemsThe scope of this document is to establish common test methodology for power transfer efficiency and standby power for consumer electronic devices that utilize wireless power transfer. R6SC3WG3 -- CEA-2042.3 -- Methods of Measurement for Efficiency and Standby Power of Wireless Power Systems | 2011-02-09 | 2012-02-09* | Draft in Development | 25% |
R6SC3WG5 -- CEA-2042.5 -- System Requirements for Tightly-Coupled Wireless Power TransferThis standard defines a tightly coupled wireless power system. R6SC3WG5 -- CEA-2042.5 -- System Requirements for Tightly-Coupled Wireless Power Transfer | 2011-10-24 | 2012-10-24* | Draft in Development | 25% |
R6WG10 -- CEA-2006-C -- Testing & Measurement Methods for Mobile Audio AmplifiersCEA-2006-C defines characteristics that, considered collectively, describe the performance of power amplifiers designed for use in mobile applications. R6WG10 -- CEA-2006-C -- Testing & Measurement Methods for Mobile Audio Amplifiers | 2012-10-18 | 2013-10-18* | Draft in Development | 0% |
R6WG14 -- CEA-2015-A -- MOBILE ELECTRONICS CABLING STANDARDThis standard defines size and performance requirements for power and speaker cabling used in mobile electronics applications. R6WG14 -- CEA-2015-A -- MOBILE ELECTRONICS CABLING STANDARD | 2012-10-18 | 2013-10-18* | Draft in Development | 0% |
R6WG16 -- CEA-CEB25 -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics DevicesTo develop technical documents related to allowing compatible Common Alert Protocol (CAP) usage among various consumer electronics devices that process CAP-encoded data, independent of delivery method. Such documents may include guidelines for filtering and device response. R6WG16 -- CEA-CEB25 -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics Devices | 2009-10-27 | 2011-10-18 | Published | 100% |
R6WG17 --CEA-2046 -- Headset Cable CompatibilityA standard that will define wired headphone, microphone, control signal and antenna compatibility across multiple portable and handheld devices.. R6WG17 --CEA-2046 -- Headset Cable Compatibility | 2012-10-18 | 2013-10-18* | Draft in Development | 0% |
R6WG8 -- CEA-803-B -- Mobile Electronics Wiring Designations for Audio, and Vehicle Security/ConvenienceThis standard defines the terms, abbreviations, and definitions used in the sales and installation of vehicle aftermarket audio and security equipment. The standard adds continuity to mobile electronics installation information, enables easier data collection, and ensures consistency of information to installers. | 2011-01-26 | 2012-11-05 | Draft in Development | 100% |
R7 -- ANSI/CEA-2005 -- AV Adapter to Connect Ethernet and 1394 Devices5-Year Review for ANSI/CEA-2005 AV Adapter to Connect Ethernet and 1394 Devices. R7 -- ANSI/CEA-2005 -- AV Adapter to Connect Ethernet and 1394 Devices | 2011-10-31 | 2013-02-01 | Published | 100% |
R7 -- ANSI/CEA-931-C R-2012 -- Remote Control Command Pass-through Standard for Home Networking5-year review of ANSI/CEA-931-C Remote Control Command Pass-through Standard for Home Networking. R7 -- ANSI/CEA-931-C R-2012 -- Remote Control Command Pass-through Standard for Home Networking | 2011-05-26 | 2012-09-07 | Published | 100% |
R7 -- CEA-2027-B -- A User Interface for Home Networks Using Web-based Protocols5-year review of CEA-2027-B A User Interface for Home Networks Using Web-based Protocols. R7 -- CEA-2027-B -- A User Interface for Home Networks Using Web-based Protocols | 2011-05-26 | 2012-12-31* | Pre-Vote Comments | 70% |
R7 -- CEA-851-A R-20XX -- Versatile Home Network5-Year Review for CEA-851-A Versatile Home Network. | 2011-06-06 | 2013-12-31* | Draft in Development | 10% |
R7 -- CEA-CEB18 -- Recommended Practice for Transmitter Control and Status Indication in Transmitting Portable Electronic Devices (T-PEDs)5-Year Review for CEA-CEB18 Recommended Practice for Transmitter Control and Status Indication in Transmitting Portable Electronic Devices (T-PEDs). | 2011-10-27 | 2012-11-12 | Published | 100% |
R7--ANSI/CEA-709.3 R-20XX--Free-Topology Twisted-Pair Channel SpecificationThis document specifies the CEA-709.3 free-topology twisted-pair channel and serves as a companion document to the CEA-709.1 Control Network Protocol Specification. The channel supports communication at 78.125 kbps between multiple nodes, each of which consists of a transceiver, a protocol processor and application processor, a power supply and application electronics. R7--ANSI/CEA-709.3 R-20XX--Free-Topology Twisted-Pair Channel Specification | 2012-10-17 | 2013-04-30* | Draft in Development | 50% |
R7SC8WG1 -- CEA-2045 -- Modular Communications InterfaceThis document is a specification for a modular communication interface. The specification details the mechanical, electrical, and logical characteristics of a socket interface that allows communication devices to be separated from end devices. R7SC8WG1 -- CEA-2045 -- Modular Communications Interface | 2012-01-19 | 2013-02-05 | Published | 100% |
R7WG13 -- CEA-709.2-A R-2012 -- Control Network Power Line (PL) Channel SpecificationThis document specifies the Control Network Power Line (PL) Channel and serves as a companion document to the CEA-709.1 Control Network Protocol Specification. Its purpose is to present the information necessary for the development of a PL physical network and nodes to communicate the share information over the network. R7WG13 -- CEA-709.2-A R-2012 -- Control Network Power Line (PL) Channel Specification | 2010-08-11 | 2012-12-03 | Published | 100% |
R7WG13 -- CEA-709.4 -- Fiber-Optic Channel SpecificationIn conjunction with CEA-709.1 Control Network Protocol Specification, CEA-709.4 defines a complete 7-layer protocol stack for communications on a CEA-709.4 single-fiber (half-duplex) fiber-optic channel. R7WG13 -- CEA-709.4 -- Fiber-Optic Channel Specification | 2010-03-05 | 2013-02-01 | Published | 100% |
* Estimated completion date